Tanks

to bleed oil in the Tank
1. prepare the pump
2. prepare the burner
3. pressurize the tank with (40-60) psi _{we can that pressure from the separator through pipe or through bleeder of the daniel or bleeder of the choke}
4. start pumping oil to the sealine
5. take care of the air lock
dumbing water in the tank
1. line up from tank to overboard
2. you can pressurize the tank with afew gas to push the water
3. always check the return overboard
bleed and dumb separator
1. close the pcv to keep good pressure inside separator to push the level
2. open 3" oil line
3. you can open LCV full
flush the line
1. line up from pumping to our line until sealine
2. start flush and check the return always
3. once the return is clear water stop flushing and secure the line

Coming Soon